Anhydrous Ammonia Nurse Tank Testing
Testing Equipment
Test Provided
Wagner’s Welding provides DOT certified Anydrous Ammonia Nurse Tank Testing. The test consists of three phases. Each phase must pass in order for the tank to pass. If a tank passes it will need to be tested again in five years. If it fails it cannot be used as a pressure vessel. Phases include:
Visual
Thickness
Test completed using ultrasonic testing equipment at the recommended locations on the tank.
Hydro Test
Tanks are required to be filled with water and hydro tested at 375 PSI for a minimum of 10 minutes. This ensures the integrity of the tank.
Resource Links
Safety is important to us. Here are some links to stories involving Anydrous Ammonia Nurse Tank Ruptures.
University of Iowa: Anhydrous Ammonia Nurse Tank Rupture Kills Agricultural Cooperative Worker
(Photograph courtesy of NTSB)
(Photography courtesy of Minnesota Department of Labor and Industry)
Contact Us
Wagner’s Welding
109 South Gardner St.
Easton, KS 66020
P: 913-773-8419
Cell: 913-683-8303
[email protected]
Have You tested your tanks?